Advertisement

4Cast CS
WIRELESS THERMO • HYGRO
1
Art. No. 7001030
Instruction Manual
GB
IE

Advertisement

Table of Contents
loading

Summary of Contents for Bresser 7001030

  • Page 1 4Cast CS WIRELESS THERMO • HYGRO Art. No. 7001030 Instruction Manual...
  • Page 2: General Information

    GENERAL INFORMATION About this Instruction Manual Please read the safety instructions in this manual carefully. To avoid damage to the unit and the risk of injury, only use this product as described in the manual. Keep the instruction manual handy so that you can easily look up information on all the functions.
  • Page 3: Must Read Before Getting Started

    GB/IE MUST READ BEFORE GETTING STARTED Your Meteotime weather station is different to traditional weather stations, which measure the prevailing conditions only. The data of this weather station is based on the METEOTIME, which is worked out on a daily basis by highly professional meteorologists using state-of-art instruments.
  • Page 4: Data Transfer

    POTENTIAL SOURCES of INTERFERENCE With all Meteotime weather stations, we should take measures to provide best possible radio reception. DCF is a long wave station with a broad reach (ap- proximately 1500 km). However, as with a long wave radio station, interference may occur which is often caused by the following influences: •...
  • Page 5: Scope Of Delivery

    GB/IE SCOPE OF DELIVERY This package contains the 4Cast CS weather station, a suitable power supply and a wireless outdoor sensor for external temperature and humidity measurement. MAIN FEATURES • Weather status for today and tomorrow for 90 regions in Europe (470 cities for easy choice) •...
  • Page 6 INTRODUCTION The 4Cast CS LCD display shows: • Todays weather information window • Weather information for the following day (Day 2). • Information window which shows date and current time, alarm time, cities and warnings on critical weather conditions • Indoor and outdoor temperature and humidity Motion sensor for Information for today or tomorrow (shift), switching the display of...
  • Page 7 GB/IE THERE IS A TOTAL OF 8 BUTTONS ON THE WEATHER STATION:: • Critical Weather Information Time and Date Day/Night Weather Status ˚C Change • Read the critical weather information one by one. CHANNEL • Switch to read Outdoor Thermometer channel 1,2, 3 or indoor. •...
  • Page 8: Led-Anzeige

    THERMO/HYGRO REMOTE SENSOR WIRELESS THERMO • HYGRO RESET 1 2 3 CHANNEL A. LED-ANZEIGE flashes once when the remote unit transmits a reading and flashes twice when low battery is detected on sensor unit B. BATTERY COMPARTMENT accommodates 2 UM-3 or “AA” size 1.5V batteries C.
  • Page 9: Getting Started

    GB/IE GETTING STARTED • Insert 2 pcs. AA batteries into the remote sensor first. (before operation the weather station). • Connect the weather station with the power socket (power supply). The weather station will automatically scan for the radio-controlled clock signal and for the Meteotime signal when started.
  • Page 10 In the event the Meteotime icon change to , that means there are potential sources of interference on the unit. The sources of interference may come from the electronics equipment such as TV-set, computers, household machines etc. It may also be due to lots of concrete, metal parts and electrical equipment in the building.
  • Page 11 GB/IE • Then press [ ▲ ] or [ ▼ ] key to select the city, and the city name will be shown in the information window. Example: „FRANKFURT.M“ means the city ‘Frankfurt am Main’ . Press [SET] to accept this value. From now on, the information box will display the selected city..
  • Page 12 Main’, and the „FRANKFURT.M“ will show in the information window. • Press [ TEST √ ] to remove the √, and this city is successful remove out of your list of preference cities you had selected. • Repeat this if you wish to remove more cities from your list •...
  • Page 13 GB/IE • Press [ SET ] again, then „ “ is shown in the information window, press [ ▲ ] or [ ▼ ] key to adjust the time zone. • Press [ SET ] again, then the LANGUAGE will be shown in the information window, press [▲] or [ ▼...
  • Page 14 CRITICAL WEATHER INFORMATION Meteotime Weather signal contains the Critical Weather Information such as Gust, Frozen Rain, Heavy Snow, Thunder, Strong UV, Dense Fog, Bise, Mistral, etc. for today and coming three days. A critical weather alert signal „ “ will be turned on in case that day has critical weather that the user must know.
  • Page 15: Single Alarm

    GB/IE • Press [ SET ] key to go back to the display of CITY DATE WEEKDAY ALARM SINGLE ALARM PRE-ALARM. If you would like to read the weather Information in the information window, then press [ DAY/ NIGHT] key to display Day Night weather information and also the Critical Weather Information.
  • Page 16 WEATHER STATUS /INFORMATIONEN • There is a total of 15 weather status symbols for the day time and another 15 symbols for the night time.
  • Page 17: Reception Indicator

    GB/IE RECEPTION INDICATOR Above the channel indicator the current connection with the remote sensor is indicated by a wave symbol: Symbol Status Searching for the remote sensor signal Remote sensor connected No signal received for more than one hour SEARCHING FOR OUTDOOR SENSORS You can start searching for outdoor sensors manually by pressing and holding the [▼] button for about 3 seconds.
  • Page 18: Maximum And Minimum Temperatures

    MAXIMUM AND MINIMUM TEMPERATURES • The maximum and minimum recorded indoor and outdoor temperatures and ˚C humidity will be automatically stored in the memory of the main unit. Press ˚C [MEM] button, the respective indicators, [MAX] or [MIN] will then be displayed. •...
  • Page 19 GB/IE • The number 15 flashes and this means that this alarm will now sound 15 minutes before the weekday alarm or single alarm. • Use the UP (▲) or DOWN (▼) button to select the pre-alarm interval between 15 and 90 minutes. •...
  • Page 20: Notes On Cleaning

    Only use a dry cloth to clean the exterior of the device. To avoid damaging the electronics, do not use any cleaning fluid. EC DECLARATION OF CONFORMITY Bresser GmbH has issued a “Declaration of Conformity” in accordance with applicable guidelines and corresponding standards. This can be viewed any time upon request.
  • Page 21 GB/IE...
  • Page 22 Bresser GmbH Gutenbergstr. 2 DE-46414 Rhede Germany www.bresser.de · service@bresser.de Errors and technical changes reserved.

This manual is also suitable for:

4cast cs

Table of Contents