Supported Modular Components - Sun Oracle Netra SPARC T3-1B Product Notes

Supported Modular Components

'
The following table lists the modular components that are supported with the Sun
Netra SPARC T3-1B server module.
Note – For the latest information on hardware component requirements, refer to the
product notes for your component.
Product Model Number and Name
NEMs
NEM 2073A –
Sun Blade 6000 Ethernet Switched Network
Express Module 24p 10GbE NEM
NEM 4250A –
Sun Blade 6000 Network Express Module 10-
port 1 GbE Pass-Through NEM
RAID Express Modules (REMs)
SG-SAS6-REM-Z
Sun Blade 6000 RAID 0/1 SAS2 HBA REM
Fabric Expansion Modules (FEMs)
X5735A
10GbE XAUI Pass-Through FEM
X4871A-Z
Dual 10GbE PCIe 2.0 FEM (Intel)
7100283 (ATO) / 7100633 (PTO)
PCI-E Pass-Through FEM
PCIe Expansion Modules (PCIe EMs)
7100486, 7100487, Quad Gigabit Ethernet
Express Module MMF PCI EM, (Fiber)
7100483, 7100484, Quad Gigabit Ethernet UTEP
Express Module (copper)
SGX-SAS6-EM-Z
SAS2 Dual Port Express Module
Notes
Requires:
• For 10GbE network connectivity – FEM 4871A-Z, or FEM
4871A-Z-N.
Refer to the NEM documentation at:
http://www.oracle.com/pls/topic/lookup?ctx=
E19285-01
Provides GbE connectivity – no FEM required.
For internal storage connectivity.
For 10GbE network connectivity. Must be installed in the
FEM X and FEM 0 motherboard connectors.
For 10GbE network connectivity. Must be installed in the
FEM 0 motherboard connector.
Must be installed in the FEM 0 and FEM 1 motherboard
connectors.
Requires shielded twisted pair ethernet cable to meet NEBS
Level 3 ESD requirements.
Chapter 1 General Information 3