Identifying The Netra Chassis Models - Sun Oracle Netra SPARC T3-1B Product Notes

Identifying the Netra Chassis Models

This section replaces similar information in the service manual. There are four Netra
6000 chassis models. Two models are AC and two are DC. Some server modules and
some components will only work together in a certain chassis, and that information
is also provided in these product notes.
Netra 6000 Modular
System Chassis
Marketing Number
N6000-AC
594-6438
N6000-DC
594-6726
N6000-AC
7100418
594-6893
N6000-DC
7100417
594-6892
The most visible difference between the two chassis models is the CMM on the rear
of the chassis.
Left: CMM (501-7379) on the N6000-AC 594-6438 chassis, and the N6000-DC 594-
■
6726 chassis.
Right: CMM (511-1531) on the N6000 DC 7100417 chassis and the N6000 AC
■
7100418 chassis.
Right: CMM Product Part Number 7019286 or higher on the 7100417 chassis and
■
the 7100418 chassis. (This CMM is required to support the Sun Blade 6000
Virtualized 40GbE Network Express Module)
2 Netra SPARC T3-1B Server Module Product Notes • September 2012
T3-1B Server Module
CMM ILOM Firmware Support
3.X Not supported
3.X Not supported
4.X Yes
4.X Yes