7-7 Adjustment of the wiper
(1) Loosen the wiper setscrew
adjust the wiper
where the wiper
○
needle point
2 with about 2 mm
clearances right after the sewing
machine is stopped running at the
needle upper position (the thread take
up lever's highest position).
[NOTE] When the presser foot position or the presser foot lift is changed, the wiper
○
presser foot
4 .in that case, please do not use the wiper
function with operation
7-8 Adjustment of the bobbin winder
(1) Adjustment of the winding volume
Loosen the setscrew
move the adjusting lever
the adjusting lever
volume is adjusted 80%of the full volume when the sewing machine is shipped from the factory.
(2) Adjustment of the proper position of the bobbin winder Firstly . loosen the setscrews
From the library of: Superior Sewing Machine & Supply LLC
○
3 and
○
1 to be positioned
○
1 passes under the
○
2 of the adjusting lever
○
1 to the arrow direction "a" the Winding volume is reduced,and if move
○
1
to the arrow direction "b", the winding volume is increased.The winding
—
○
1 .If do not use the wiper
○
1 and adjust the position of the adjusting lever
19
—
○
1 may collide with the
○
1 ,cancel the wiper
○
1 .If
○
○
3 and
4 of