The Sewing Operation - HIGHLEAD HLK-1510 Instruction Manual

home position.
(4) When the start switch
Caution
★ Depending on the shape of the work holder，the collision may be happened with the work holder and the
presser foot while the work holder is on the way back to the home position．For avoidance of this accident，
before starting the sewing operation . program the work holder returning home with the operation panel of
the control box to trace the sewing pattern．

6-2 The sewing operation

Caution
★ It is very dangerous to operate the sewing machine without the safety guards(Eye guard： belt cover， Link cover，
Finger guard etc．)．
★ Please make sure to always operate the sewing machine with the safety guards．
★ Please do not put unnecessary articles except for the sewing operation on the tabletop．
★ Please keep the hands and the face away from the needle．
(1) Turn the power switch○ 1
The collision may be happened with
the work holder and the presser foot
depending on the work holder shape
when the work holder is moved to
original position.
(2) In sewing interface, press
return to the interface of data input.
(3) In the interface of data input, press
select the
enter the interface for selecting the
mode(as shown in the figure righe)
(4) After mode selecting end , back
to the interface of data input, press
to select
interface for selecting pattern number ,
From the library of: Superior Sewing Machine & Supply LLC
○
(left)is pressed again，the operation will start ．
2
ON.
to
to
,then press to
,then enter the the
—
11
—