Maintenance; Cleaning; Disposing Of Oil Waste - HIGHLEAD HLK-1510 Instruction Manual

(2) Loosen four setscrews
Y-stepping motor adapter
(3) Press the Y-motor adapter
direction lightly.
(4) Fasten the setscrews
the motor cover to original position.
NOTE After the adjustment, please make sure
that there is no gap in the gear
mechanism.
periodically for reduction of noise or
abrasion

8 MAINTENANCE

Caution
★Please make sure to turn the power switch always OFF when clean up the sewing machine．
★Before or after the sewing operation，clean up the sewing machine and check the Oil level in the oil tank．

8-1 Cleaning

(1) Turn the power switch OFF．
(2) Remove the dust and the
thread waste
around the threading parts or
the shuttle hook
(3) Check the oil level in the
oil tank．1f the oil is under
the red mark level supply the
oil to be over the red mark
level．

8-2 Disposing of oil waste

7. lf the waste oil is full， please remove the oil .
From the library of: Superior Sewing Machine & Supply LLC
○
1 of the
○
2 .
○
2 to arrow
○
1 securely, and put
Please grease gear
sticking
area．
—
26
—