Table of Contents
Advertisement
(1) Turn the power switch ON and cancel the sewing area limit with the operation panel.
(2) After the cancellation of the sewing area limit, once. Turn the power switch OFF.
7-18-1. Shifting the mechanical home position to the X direction
(1) Remove the X-Y cover (right),(left) and X cover.
(2) Loosen the detector plate fix screws(2 pieces)
mechanical home position is shifted to the left and if it is moved to the left, the mechanical home
position is shifted to the right.
(3) After the mechanical home position setting，tighten the detector plate fix screws
[NOTE] When the original mechanical home position is shifted． Please check the clearance between the X detector
plate and the X detector．This clearance should be set within the range of 1.0—1.5 mm．
From the library of: Superior Sewing Machine & Supply LLC
○
1 . if move the detector plate
24
—
—
○
2 to the right, the
○
1
securely．
Advertisement
Table of Contents
