Threading; Adjustment Of Stitch Length And Reverse Sewing; Setting Bobbin - HIGHLEAD GC24698-BRHL Instruction Manual

（3）Press lever 1 in the direction of the arrow, and start the sewing machine.
（4）The operation will automatically stop when winding is completed.
（5）Adjustment of thread winding strength, adjust with the thread adjuster nut 2.
（6）Adjustment of thread winding amount, adjust by loosening screw 3 and moving adjustment plate 4:
The thread winding amount will increase when moved in the direction of a.
The thread winding amount will decrease when moved in the direction of b.
7. THREADING(Fig.6,Fig.7)
（1）Pass each needle thread through thread guide A.
Note:When thin slippery thread(polyster thread) is used pass the thread through thread guide B as
show in Fig.6.
（2）Thread take-up lever to the highest position,pass each thread in the order in Fig.7.
Note:Pressing the tension releasing button ,the thread can be pulled out easily.
8. ADJUSTMENT OF STITCH LENGTH AND REVERSE SEWING(Fig.8)
Rotate the stitch length dial to change the stitch length.
When press the feed reversing lever or press the touch-back, reverse sewing will take place.Loose the lever or
touch-back, reverse sewing will disappear.
9. SETTING BOBBIN(Fig.9,Fig10)
Pull out the thread from the bobbin,then hold the bobbin into the bobbin shaft and push down the hinge latch.
— 3 —