Changing Light Bulbs - Westinghouse FJ302 User Manual

USING YOUR REFRIGERATOR
• If a large quantity of ice is needed at one time, it is best
to remove cubes directly from the ice cube container
• When the ice maker is operating, it is normal to hear
the sound of:
– the motor running.
– ice dropping into the ice container.
– the water valve opening or closing.
– ice loosening in the tray.
– running water.
FRIDGE
TEMP
LAMP
ON/OFF
DRINKS FAST CLOCK ECO/ ALARM
CHILL FREEZE VACATION RESET
TIPS & INFORMATION
The water connection to your ice and water product
should only be done by a licensed refrigeration mechanic,
plumber or electrician.
Slide out glass shelves
To make access to your food easier, the refrigerator
compartment is fitted with glass shelves. To remove the
shelves, gently pull them forward until the shelf comes clear
of shelf struts (where fitted). To return the shelf, make sure
there is nothing behind it that may obstruct movement and
gently push the shelf into the cabinet and into its original
position.
ice&water
CUBE CRUSH ON OFF
ICE WATER
Freezer bins
Freezer bins and wire freezer shelves are fitted to freezer
compartments. All the bins pull out for easy access.
To remove the bin, pull it out until it hits the stop then lift the
front to unhook the stop while continuing to pull forward,
until the bin is free of the runners under the shelf.
cHANGING THE REFRIGERATOR LIGHT bULbS
To change the food compartment light bulb:
1. Check your temperature settings and write them down
(Ice & Water only).
2. Switch the refrigerator off at the wall and remove plug
from power point.
3. Unclip the light lens by inserting your fingers under
the light lens, lifting until the light lens is clear of the
housing.
4. Unscrew the light bulb.
5. Replace the light bulb with a bulb of the same type and
wattage.
6. Replace the light lens by inserting the tabs on the top of
the light lens into the frame and pushing the bottom of
the lens in with both hands.
7. Turn the refrigerator back on and reset your temperature
to the previous settings (Ice & Water only). See the
section on 'Adjusting Temperatures'
cHANGING THE FREEZER LIGHT bULbS
To change the freezer compartment light bulb:
1. Check your temperature settings and write them down
(Ice & Water only).
2. Switch the refrigerator off at the wall and remove plug
from power point.
3. Unclip the light lens by inserting your fingers under
the light lens, lifting until the light lens is clear of the
housing.
4. Unscrew the light bulb.
5. Replace the light bulb with a bulb of the same type and
wattage.
6. Replace the light lens by inserting the tabs on the top of
the light lens into the frame and pushing the bottom of
the lens in with both hands.
7. Turn the refrigerator back on and reset your temperature
to the previous settings (Ice & Water only). See the
section on 'Adjusting Temperatures'
lift lens and
remove
lift lens
and remove
1