Westinghouse FJ302 User Manual page 40

TOp MOUNT/bOTTOM MOUNT/SINGLE DOOR
USING YOUR AppLIANcE
Spill Safe glass shelves (where fitted)
Spill safe glass shelves keep spills on the shelf. A shelf
retaining system minimises accidental movement of shelves.
The shelves can be adjusted to many different heights. Spill
safe glass shelves are not to be used as slide out shelves.
To remove the shelves, gently pull them forward until the
shelf comes clear of shelf struts.
To return the shelf, make sure there is nothing behind it that
may obstruct movement and gently push the shelf into the
cabinet and into its original position.
wire Shelves (where fitted)
To remove these shelves from the cabinet, lift the rear of the
shelf and pull forward.
wine Rack (where fitted)
The wine rack can be used to store various types of bottles
such as wine or beer. Bottles should be stored with the
bottom end towards the back of the refrigerator. If you want
to remove the wine rack or change it's position, lift the rear
of the rack and pull forward.
Freezer baskets (where fitted)
Freezer baskets and a freezer shelf are fitted to bottom
mount (BM) freezers and single door all freezers (AF).
Wire baskets are used to provide easy visibility of the
contents. Both the baskets and the shelf pull out for easy
access and have a stop to prevent the basket and shelf
being pulled out too far.
To remove the basket, pull it out until it hits the stop then
lift the front to unhook the stop while continuing to pull
forward.