Changing Light Bulbs - Westinghouse FJ302 User Manual

USING YOUR AppLIANcE
cHANGING THE LIGHT bULbS
Refrigerator light
1. Switch off the power at the power point and remove
the refrigerator's power cord from the power point.
2. Remove shelves.
3. Carefully unclip the light cover. You do this by pulling
the upper part of the cover towards the front of the
cabinet.
4. Unscrew the light bulb and replace it with a bulb that is
the same as the original.
5. Replace the light cover by hooking the light cover lugs
into the bottom of the housing and pressing the upper
part of the cover until it clips in.
6. Replace shelves.
7. Wait 5 minutes to ensure pressures in the refrigeration
system are equalized. Then reconnect and turn the
refrigerator on at the power point.
Less Cold
Less Cold
Mid
Colder
Freezer
Mid
Colder
Refrigerator
Freezer light (where fitted)
1. Switch off the power at the power point and remove the
refrigerator's power cord from the power point.
2. Carefully unclip the light cover. You do this by pulling
the light cover tab at the rear towards the front of the
cabinet.
3. Unscrew the light bulb and replace it with a bulb that is
the same as the original.
4. Replace the light cover by hooking the light cover lugs
into the front of the housing and pressing the rear of the
cover up until it clips in.
5. Wait 5 minutes to ensure pressures in the refrigeration
system are equalized. Then reconnect and turn the
refrigerator on at the power point.
TOP FREEZER MODEL
(ELECTRONIC
MODELS ONLY)
SINGLE DOOR ALL
FREEZER MODEL
41