Ice & Water Model Dispenser Features - Westinghouse FJ302 User Manual

cOMpAcT SIDE bY SIDE
USING YOUR REFRIGERATOR
ELEcTRONIc DISpLAY pANEL (IcE & wATER MODEL)
• Vacation (holiday) mode
Vacation mode is suitable if you will be away from your
appliance for an extended period. To take advantage
of maximum efficiency press the eco/vacation button
twice in succession just before you leave–do this while
in normal mode. The appliance will then enter vacation
mode, as indicated by the aeroplane symbol. Press eco/
vacation button again to cycle between 'normal', 'eco'
and 'vacation' modes. If in eco mode a single button
press is all that is required to enter vacation mode.
Vacation mode is exited automatically once the
refrigerator door is opened and normal mode resumes.
ENVIRONMENTAL TIPS
Eco and vacation modes minimise defrosting to save
energy, while maintaining your temperature settings.
NOTE: Opening the freezer door has no effect on the
operation of Eco and Vacation Modes
Other electronic features
Your refrigerator:
• controls the compressor and fan independently to
provide the best performance
• provides extra cooling depending on the number of
door openings
• automatically defrosts during periods when the door is
not being opened frequently
• has a 90 second memory backup on the display so
that the time and settings are not lost during short power
interruptions
TIPS & INFORMATION
If you find that the display malfunctions, this may be due to
brief power supply interruptions. If this is the problem, you
simply need to turn the refrigerator off at the power point
and wait 5 minutes, then turn the refrigerator on again at
the power point.
IcE & wATER
IcE AND wATER DISpENSER FEATURES
The ice and water dispenser conveniently dispenses cool,
filtered water and ice cubes or crushed ice. To operate the ice
dispenser, select an ice option using the electronic display.
drip
tray
Press a glass against the dispensing paddle. Hold the top
of the glass as close as possible to the ice outlet, so that
you will catch all the ice. To stop dispensing ice, pull the
glass away from the dispensing paddle. Do not remove the
glass until the ice has finished coming out.
To operate the water dispenser, press a glass against the
dispensing paddle. To stop dispensing water, pull the glass
away from the dispensing paddle. A drip tray located at
the base of the dispenser (see diagram above) will catch
small spills and allow them to evaporate. The drip tray is
removable and dishwasher safe.
CAUTION
Do not pour water or excess cubes into the drip tray
because it is not connected to a drain.
Dispenser lamp
The dispenser has a light which can be turned on and off
by pressing the Lamp button on the electronic display (see
diagram below). The lamp is also activated for 6 seconds
whenever a dispensing paddle is pressed. The light comes
from 6 ultra bright LEDs (light emitting diodes), which are
part of the electronic display. These are designed to last the
life of the refrigerator and are not customer replaceable.
The same technology is used in the interior multiflow duct
(blue strip lights).