Ice & Water Model Electronic Display; Setting The Clock; Adjusting Temperatures; Other Display Features - Westinghouse FJ302 User Manual

cOMpAcT SIDE bY SIDE
USING YOUR REFRIGERATOR
ELEcTRONIc DISpLAY pANEL (IcE & wATER MODEL)

Setting the clock

1. Press and hold the clock button down for two seconds.
Hours and minutes will then appear on the display.
2. Press the fast freeze button to advance the hours. Hold the
fast freeze button down for continuous and fast advance.
3. Press the eco/vacation button to advance the minutes.
Hold the button down for continuous and fast advance.
4. The clock can be switched between 24 hour or 12 hour
formats by pressing the drinks chill button. In 12 hour format
the indicator will switch between am and pm accordingly.
5. When the correct time is displayed, release the clock button.

Adjusting temperatures

The default temperature for the refrigerator is 3
default of -18
temperatures, use the instructions below. You should make
only small adjustments and wait 24 hours to see whether
you need to make further changes.
TIPS & INFORMATION
When you set a temperature, you set an average temperature
for the whole appliance cabinet. Temperatures inside each
compartment may vary, depending on how much food you
store and where you place it. High or low room temperature
may also affect the actual temperature inside the appliance.
changing the freezer temperature
Press the freezer button to make the freezer colder in 1
steps. Once -23
o
-14 C with the next button press. You'll notice that the bar
graph gets smaller with colder freezer settings.
changing the refrigerator temperature
Press the fridge button to make the fridge colder in 1
Once 0
button press. The bar graph gets smaller with colder settings.
o C for the freezer. If you want to change the
o C is reached the display will return to
o
C is reached the display will return to 7
IcE & wATER
Fast freeze function
Use the fast freeze function when you add a large amount
of food to the freezer compartment. This freezes the food
quickly but does not affect the temperature in the refrigerator
compartment.
To use this function, press the fast freeze button once. An
animated icon will light up. The fast freeze function will
now operate for 90 minutes. If you want to turn the fast
freeze function off before 90 minutes have passed, simply
press the fast freeze button again. The icon will disappear
and the freezer will return to normal operation.
o
C , with a
Freezer temperature alarm
If the freezer becomes too warm due to the freezer door
being left open or warm food being placed too close to the
temperature sensor in the freezer (see diagrams on page
13 for the sensor location), a buzzer will sound. The icon
adjacent to the alarm reset button or above the alarm reset
button , the freezer set temperature and the bar graph will all
flash until the alarm reset button is pressed. Once pressed,
o
C
the alarm disable icon will illuminate for 50 minutes, or until
the temperature reaches an acceptable level.
Make sure nothing is holding the freezer door open and
move any warm food away from the temperature sensor
(see diagrams on page 13). If the freezer is still too warm
after 50 minutes the alarm will sound again, indicating that
o C steps.
something may be wrong with your appliance.
o
C with the next
NOTE: The freezer temperature alarm can be reset for
12 hours by pressing the alarm reset button continuously for
10 seconds.