Ice And Water Model - Westinghouse WSE6200SA User Manual

ABOUT THE USER INTERFACE
Controls – ice and water model
10
9
8
7
BUTTON / DESCRIPTION
ICON
Compartment Selector button
1
Ice & Water on/off button
2
Lock Icon
3
Filter status indicators
4
Water on/off button
5
Crushed Ice Button
6
Cube Ice button
7
Drinks Chill button
8
Quick freeze button
9
Decrease button
10
Digital display
11
Increase button
12
IMPORTANT TIPS & INFORMATION
The factory default settings for the refrigerator is "3°"
and "-18°C" for the freezer. If you want to change the
temperature, remember to make only small adjustments
and wait 24 hours to see if it's correct.
14
USER INTERFACE
11 12
6 5
PRIMARY FUNCTION
Selects controllable compartment.
Selects operational status.
Indicates if the user interface is locked.
Indicates filter replacement timing.
Selects operational status.
Selects crushed ice.
Selects cubed ice.
Selects drinks chill timer.
Enables quick freeze model.
Decreases temperature of selected compartment.
Indicates temperature of selected compartment.
Increases temperature of selected compartment.
FUNCTIONS OF THE USER INTERFACE

ice and water model

FUNCTION
Setting the freezer temperature
Setting the refrigerator temperature
Quick freeze mode
Decreases the freezer temperature to
1
-23°C for 12 hours before returning to
pre-set mode.
2
Ice Maker
Enables/disables ice making features.
3
Display Lock
4 Deactivates the user interface controls.
Drinks Chill
Sets a timer for between 1 and 30
minutes as a reminder for when drinks
are placed in the freezer for quick chill.
Water on/off
Enables/disables water dispensing
features.
Cubed Ice
Press this button to dispense cubed ice.
Crushed Ice
Press this button to dispense crushed ice.
Replace Filter
Press this button to reset the filter timer
once you have replaced the filter.
ICON OPERATION
• Press button 1 until freezer is displayed on icon 1.
• Press buttons 10 or 12 to adjust temperature up or down.
• Press button 1 until the refrigerator is displayed
on icon 1.
• Press buttons 10 or 12 to adjust temperature up or down.
• Press button 9 until the freeze icon is illuminated.
• Quick freeze mode can be deselected using button 9.
• To enable/disable press button 2.
• To turn on/off press and hold button 3 for 3 seconds,
the lock icon is illuminated when activated.
• To turn on press button 8 and initial time of 20 mins will appear
on digital display. To adjust time use buttons 10 and 12.
• Alarm will sound when time is finished.
• Press button 8 to turn off during or after countdown. The
time taken to chill depends on the size of your bottle.
• Do not leave the bottle inside the freezer longer than the
time needed for chilling.
• To enable/disable press button 5.
• Press button 6 for cubed ice to dispense.
• Press the dispenser lever to dispense the ice.
• Press button 7 for crushed ice to dispense.
• Press the dispenser lever to dispense the ice.
• Button and icon 4 will initially display as Orange to
indicate a new filter should be ordered.
• Button and icon 4 will turn red when the filter needs to
be changed.
• Pressing button 4 will reset the change filter timer.
15
USER INTERFACE