Reboot; Upgrade - TBK vision BUL7436EIR User Manual

TBK Vision Plus Network Camera User Manual

Default Configuration
Click "Load default" button to restore all system settings to the default status.

4.6.4 Reboot

Go toAdvanced configuration—Reboot to see an interface as shown below
Click "Reboot" button to reboot the device.

4.6.5 Upgrade

Go toAdvanced Configuration—Upgrade interface as shown below.
1. Click "Browse" button to select the save path of the upgrade file.
2. Click "Upgrade server firmware" button to start upgrading the application program.
3. The device will restart automatically.
4. After you successfully update the software, click "OK" button to close IE and then re-open
IE to connect IP-CAM.
Notice:You can't disconnect to PC or close the IP-CAM during upgrade.
29