Figure 34: Demodulator Line Settings; Figure 35: Demodulator Channel 1 Settings; Figure 36: Demodulator Channel 2 Settings; Figure 37: Demodulator Mgmt Channel Settings - SatExpander SatX Installation And Operation Manual

SatX/SE300—Ethernet Management
2. After completion of all changes, click Save to save the last configuration.
5.3.4.2.3.2 DiSEqC
DiSEqC (Digital Satellite Equipment Control) is a special communication protocol for use between a
satellite receiver and a device such as a multi-dish switch or a small dish antenna rotor. DiSEqC relies
only upon a coaxial cable to transmit both bidirectional data/signals and power. DiSEqC is commonly
used to control switches and motors, and is more flexible than 13/18 volt and 22 kHz tone techniques.
DiSEqC is also compatible with the actuators used to rotate large C band dishes if used with a DiSEqC
positioner.
79
F 34: D
IGURE EMODULATOR
F 35: D
IGURE EMODULATOR
F 36: D
IGURE EMODULATOR
F 37: D
IGURE EMODULATOR
L S
INE ETTINGS
C 1 S
HANNEL ETTINGS
C 2 S
HANNEL ETTINGS
MGMT C S
HANNEL ETTINGS
Proprietary and Confidential