SatExpander SatX Installation And Operation Manual page 51

SatX/SE300—Front Panel Operation
1. Click OK to change the SNMP read only community string value.
2. Use the ▲ ▼arrow keys to edit the value.
3. Navigate through the list using ◄ ► arrow keys.
4. The default value is public. This string can be modified.
5. Click OK to select a value.
4.2.4.1.3.3 Read-Write Community
Defines the SNMP community string for read-write only access.
1. Click OK to change the SNMP read-write community string value.
2. Use the ▲ ▼arrow keys to edit the value.
3. Navigate through the list using ◄ ► arrow keys.
4. The default value is private. This string can be modified
5. Select a value by clicking OK.
4.2.4.1.3.4 Trap Version
Selects the SNMP trap version
1. Click OK to change the SNMP trap version.
Navigate through the list using the ▲ ▼arrow keys.
2.
3. Possible values:
V1– only V1 traps are supported.
o
V2 – only V2 traps are supported
o
4. Select a value by clicking OK.
4.2.4.1.3.5 Trap Community 1
Defines the default community string to be used when sending traps.
1. Click OK to change the trap community string.
2. Edit using the ▲ ▼arrow keys.
3. Navigate through the list using the ◄ ► arrow keys.
The default value is public. This string can be modified.
o
4. Select a value by clicking OK.
4.2.4.1.3.6 Trap Host 1
Defines the address of a notification receiver that is sent with SNMPv1 TRAPs or SNMPv2 INFORM
notifications.
1. Click OK to change the trap host.
2. Edit using the ▲ ▼arrow keys.
3. Navigate through the list using the ◄ ► arrow keys.
4. Modify the string as necessary.
5. Click OK.
4.2.4.1.3.7 Trap Community 2
This is similar to trap community 1 but allows for a second server to monitor traps.
1. Click OK to change the trap community string.
2. Edit using the ▲ ▼arrow keys.
3. Navigate through the list using the ◄ ► arrow keys.
4. The default value is public. This string can be modified.
41
Proprietary and Confidential