Figure 64: Event And Alarm Mask Settings - SatExpander SatX Installation And Operation Manual

SatX/SE300—Ethernet Management
F 64: E A M S
IGURE VENT AND LARM ASK ETTINGS
5.3.4.2.6.2 System Config > Redundancy
This submenu item is used to configure the redundancy parameters when working in 1:1 redundancy
setup or 1:N redundancy setup.
The redundancy method can be either basic, when using a DEV redundancy switch, or advanced when
using NSR redundancy switch.
91
Proprietary and Confidential