Table of Contents
Advertisement
SatX/SE300—Front Panel Operation
3. Select an item by clicking the OK key.
4.2.6.1.22 Downlink-Freq
Selects channel's downlink frequency from the satellite. It can improve attenuation estimation.
1. Enter the value using the numeric keypad.
2. Possible values: 1 to 40 GHz.
3. Click OK to accept the value.
4.2.6.1.23 Downlink-Polarity
Selects incoming satellite polarity. It can improve attenuation estimation.
1. Navigate through the list using the ▲ ▼arrow keys.
2. Possible values:
Vertical: polarity is vertical.
o
Horizontal: polarity is horizontal.
o
Circular-left: polarity is LHCP – left hand circular polarity.
o
Circular-right: polarity is RHCP – right hand circular polarity
o
3. Select an item by clicking the OK key.
4.2.6.1.24 Uplink-Freq
Selects incoming satellite frequency. It can improve attenuation estimation.
1. Enter the value using the numeric keypad.
2. Possible values: 1 to 40 GHz
3. Click OK to accept the value.
4.2.6.1.25 Uplink-Polarity
Selects outgoing satellite polarity. It can improve attenuation estimation.
1. Enter the value using the numeric keypad.
2. Possible values:
Vertical: Polarity is vertical.
o
Horizontal: Polarity is horizontal.
o
Circular-left: Polarity is LHCP – left hand circular polarity.
o
Circular-right: Polarity is RHCP – right hand circular polarity.
o
3. Click OK to accept the value.
4.2.6.1.26 AUPC-Max-Gain
The AUPC algorithm can be configured to add maximal allowed gain to the transmission power.
1. Enter the value using the numeric keypad.
2. Possible values: 0-15dB.
3. Click OK to accept the value.
4.2.6.1.26.1
State
Select functionality of the data channel on this submenu.
1. Navigate through the list using the ▲ ▼arrow keys.
55
Proprietary and Confidential
Advertisement
Table of Contents
