Table of Contents
Advertisement
SatX/SE300—Front Panel Operation
Destination IP address: The destination IP of the incoming data packet.
Destination subnet: The destination IP's subnet mask.
Next hop IP address: The Next hop's IP Address.
Table ID: Unchangeable at this point.
Administrative status: The Administrative Status of this route – enables or disables this route.
If the Management IP address requires routing, an appropriate line should be inserted
into the routing table to provide the management next IP hop (default gateway).
4.2.3.5
Switching
This feature is available only when choosing L2 VLAN Switching mode.
1. Click OK to change.
2. Browse using the ▲ ▼arrow keys.
3. Click OK to select an item.
4. To describe a switching table, start with an empty table.
A line cannot be added to this table unless remotes were previously configured.
5. Choose Edit, Add or Delete.
The variables on each switching row are:
VID: ID for this switching row, cannot be modified after initial configuration.
Remote name: The name for this switching row.
Administrative Status: Choose to enable or disable this row.
4.2.3.6
QoS
1. Click OK to change.
2. Browse using the ▲ ▼arrow keys.
3. Click OK to select an item.
For more information about the QoS supported by the modem, please refer to Chapter 11.
4.2.3.6.1 Classification
1. Click OK to change.
2. Browse using the ▲ ▼arrow keys.
3. Click OK to select an item.
4.2.3.6.1.1
Classification Mode
Selects the classification mode used by QoS mechanism.
The Multi-field criteria configuration is not available via front panel.
1. Click OK to change.
2. Browse using the ▲ ▼arrow keys.
3. Define the type of classification used for the QoS:
36
Proprietary and Confidential
Advertisement
Table of Contents
