Table of Contents
Advertisement
SatX/SE300—Front Panel Operation
4.2.7.1.14 EC-Max-Delay
Set the maximal delay of the search window for Duet™ echo cancelation.
1. Enter the value using the numeric keypad.
2. Possible values: 1 to 650 msec.
3. Click OK to accept the value.
4.2.7.1.15 EC-TX-Freq-Offset
Set the offset between the outbound signal and the returning signal. Usually the offset is 0.
1. Enter the value using the numeric keypad.
2. Possible values: 0 to 100 MHz.
3. Click OK to accept the value.
4.2.7.1.16 ACM Mode
Select activation of the ACM feature. For further details please refer to Chapter 6.
1. Navigate through the list using the ▲ ▼arrow keys.
2. Possible values:
DISABLE: ACM messages are not generated by demodulator.
o
ENABLE-CH1: ACM messages are generate by demodulator regarding reception quality of
o
channel 1 only.
ENABLE-CH2: ACM messages are generate by demodulator regarding reception quality of
o
channel 2 only.
ENABLE-CH1-CH2: ACM messages are generate by demodulator regarding reception quality
o
of both channel 1 and channel 2.
3. Select an item by clicking the OK key.
4.2.7.1.17 ACM Margin CH1
Set the desired link margin value in dB for channel 1 ModCod in a 0.1dB resolution.
1. Enter the value using the numeric keypad.
2. Possible values: 0 to 40dB.
3. Click OK to accept the value.
4.2.7.1.18 ACM Margin CH2
Set the desired link margin value in dB for channel 2 ModCod in a 0.1dB resolution.
1. Enter the value using the numeric keypad.
2. Possible values: 0 to 40dB.
3. Click OK to accept the value.
4.2.7.1.19 ACM Server Address
Set the IP address of the ACM server (modulator) so the client will know where to send ACM messages.
1. Enter the value using the numeric keypad.
2. Possible values: Any legal IP Address.
3. Click OK to accept the value.
64
Proprietary and Confidential
Advertisement
Table of Contents
