Technical Specifications; Mechanical Specifications; Electrical Specifications; System Heat And Power Specifications - HP HPE XP P9500 Manual

A Technical Specifications

Mechanical specifications

The following table lists the mechanical specifications of the P9500 disk array.
Table 31 P9500 mechanical specifications
Dimension
Width (inches / mm)
Depth (inches / mm)
Height (inches / mm)
System Min (lbs / kg)
Weight
Max (lbs / kg)
Rack (lbs / kg)
Weight

Electrical specifications

The P9500 supports single-phase and three-phase power. Power consumption and heat
dissipation is independent of input power.
"System heat and power specifications" (page 55)
"System components heat and power specifications " (page 56)
specifications.
"AC power - PDU options" (page 57)
phase power.

System heat and power specifications

Table 32 System heat and power specifications
Heat Dissipation
and Power
Consumption
Specifications
(Maximum
configuration)
1
Heat (KW, BTU, Kcal) and Power (kVA) values are for determining load for site planning. Actual heat generation
and power demand may be less.
2
Calculated values with drives at a typical I/O condition. (Random Read and Write, 50 IOPSs for HDD, 2500 IOPSs
for SSD, Data Length: 8Kbytes). These values may increase for future compatible drives.
Single Rack
24.0 / 610
45 / 1145
79 / 2006
1120 / 508 (Diskless)
1558 / 707
292.6 / 133
lists the PDU specifications for both single phase and three
1, 2
Parameter
DKC Module-0
Max Power 5.87
consumption
(kVA)
Max Heat 5.57
dissipation (kW)
Max BTUs per 19012
hour
Max Kcal per hour 4791
Single Module
(3 racks)
71.3 / 1810
45 / 1145
79 / 2006
3750 / 1701
4319 / 1959
Rack Weight is included in system weight
lists system heat and power specifications.
lists component heat and power
DKC Module-1 DKU Rack
5.42 5.45
5.15 5.17
17571 17643
4428 4446
Mechanical specifications
Dual Module
(6 racks)
142 / 3610
45 / 1145
79 / 2006
7500 / 3402
8560 / 3883
Full Array
(DKC-0 plus
DKC-1 plus DKU
x4)
33.1
31.4
107155
27002
55