HP HPE XP P9500 Manual page 53

Table 29 P9500 AC PDU options (continued)
Product
Number
Notes:
1. Each PDU has one fixed power cord with attached plug. Power cord is not removable.
NOTE: PDU models can be changed in the field using offline maintenance procedures.
NOTE: When ordering systems, Hewlett Packard Enterprise does not allow mixtures of different
phase PDUs in a system (even though there are no technical issues). Only upgrade orders can
ship with difference phase PDUs in a system.
Figure 17 P9500 AC power configuration diagram
*1 (left): When connected correctly, one of the two PDUs can supply power to the DKC-DKU
rack.
*1 (right): When connected correctly, one of the four PDUs can supply power to the DKC-DKU
rack.
Environmental specifications
The following table lists the environmental specifications of the P9500 storage system.
Table 30 P9500 environmental specifications
Item
Temperature
(ºF / ºC)
Relative Humidity
2
(%)
Number of
PDU per
1
Rack
Local Power
Operating
60.8 - 80.9 /
16 to 32
20 to 80
Branch circuit
requirements
per PDU Plug Type
Not Operating
-18 - 109.4 / -10 to 43
8
-18 to 95 / -10 to 35
8 to 90
Facility
receptacle
needed Notes
IEC60309 32A
plug
In Storage
-45 - 140
-25 to 60
5 to 95
Environmental specifications 53