HP HPE XP P9500 Manual page 41

Table 22 Floor load rating and required clearances for a four rack configuration (right
module) (continued)
Floor Load Required Clearance (a+b) m
Rating
Clearance (c) m
(kg/m2)
C=0
300 3.0
Notes:
1. Actual clearances for installation should be determined after consulting with construction specialist responsible
for installation building, as they could vary depending on the size/layout of the system and building conditions.
2. When various configurations of disk arrays are arranged in a row, clearance values based on the largest disk
array configuration should be used.
3. From the viewpoint of maintenance operations, it is suggested that Clearance (c) be made as large as possible.
C=0.2 C=0.4
2.6 2.3
Service clearance, floor cutout, and floor load rating
C=0.6 C=0.6
2.0 1.5
41