Three Rack Configuration (Right Module) - HP HPE XP P9500 Manual

Hide thumbs Also See for HPE XP P9500:
Table of Contents

Advertisement

*1 Clearance (a+b) is based on the floor load rating and the clearance (c). Floor load rating and
required clearances are shown in
*2 Clearance (d) is required over 300mm to open the front door. In the case that the clearance
(d) is less tan the clearance (a), give priority to clearance (a).
Table 19 Floor load rating and required clearances for a three rack configuration (left
module)
Floor Load
Rating
(kg/m2)
500
450
400
350
300
Notes:
1. Actual clearances for installation should be determined after consulting with construction specialist responsible
for installation building, as they could vary depending on the size/layout of the system and building conditions.
2. When various configurations of disk arrays are arranged in a row, clearance values based on the largest disk
array configuration should be used.
3. From the viewpoint of maintenance operations, it is suggested that Clearance (c) be made as large as possible.

Three rack configuration (right module)

The following figure and table shows the service clearances and floor load rating for a three-rack
configuration (Setting Up DKC-RACK in the Right Configuration).
36
Installation requirements
Table 19 (page
Required Clearance (a+b) m
Clearance (c) m
C=0
C=0.2
0.1
0
0.4
0.2
0.8
0.6
1.3
1.1
2.3
1.9
36).
C=0.4
C=0.6
0
0
0.1
0
0.4
0.3
0.9
0.7
1.7
1.5
C=0.6
0
0
0
0.4
1.1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents