Download Print this page

Technical Specifications - HP MSA30 DB Quickspecs

Modular smart array 30 single bus or dual bus enclosures

Advertisement

QuickSpecs

Technical Specifications

Protocol Support
O/S Support
Dimensions (HxWxD)
Shipping Dimensions
(HxWxD)
Weight
LED Indicators (on front
panel)
Drive LED Indicators
(on drive trays)
Enclosure LED
Indicators (back of unit)
Input Requirements
Relative Humidity (non-
condensing)
I/O Module Connector Very High Density Cable Interconnect (VHDCI)
Power
BTU (220 volts)
Temperature Range
Wide Ultra320 (LVD)
Wide Ultra3 (LVD)
Wide Ultra2 (LVD)
Defined by specific HP array controller or SCSI adapter used; please refer to the QuickSpecs
and/or User Guide of the specific array controller or SCSI adapter
Rack
Rack
Rack
EMU Status LED (left)
Enclosure Power LED (middle)
Fault LED (right)
Drive LED (top)
On Line LED (middle)
Drive Failure LED (bottom)
I/O Module (top)
EMU (middle)
Power supplies (bottom)
Nominal Line Voltage
Range Line Voltage
Line Frequency
Typical Input Current
Operating
Shipping
377 Watts per supply (load)
Single power supply 14
drives
Single power supply 5
drives
Single power supply 1
drive
Dual power supply 14
drives
Dual power supply 5
drives
Dual power supply 1
drive
Operating
Shipping
NOTE: To maintain proper cooling and airflow, a drive blank or drive must occupy all bays during
operation.
DA - 11738 Worldwide QuickSpecs — Version 25 — 6.8.2007
HP StorageWorks Modular Smart Array 30 Single
5.2 x 19 x 20.5 in (13.1 x 47.88 x 51.66 cm)
34.25 x 14.5 x 31.25 in (86.31 x 36.54 x 78.75 cm)
68 lb (30.9 kg)
110 to 240 V AC
90 to 264 V AC
47 to 63 Hz
2.3A at 120 V AC
10% to 90%
5% to 90%
1164 BTUs/hour
536 BTUs/hour
273 BTUs/hour
1232 BTUs/hour
625 BTUs/hour
352 BTUs/hour
50° to 94° F (10° to 35° C°)
-40° to 151° F (-40° to 66° C)
Bus or Dual Bus Enclosures
Page 11

Advertisement

loading

This manual is also suitable for:

Msa30 sb