Declaration Of Conformity - stayer SC210W Operating Instructions Manual

DECLARATION OF CONFORMITY

STAYER IBÉRICA,SA. declares that the machines:
Mitre saw SC210W
have been designed in compliance with the following standards:
·UNE-EN-61029-1, UNE-EN-61029-1/A11,
UNE-EN-61029-1/A12, UNE-EN-61029-2/9,
UNE-EN ISO 12100-1, UNE-EN ISO 12100-2
in accordance with the following directives:
2004/108/CE, 2006/95/CE, 2006/42/CE
IMPORTANT (FOR UK ONLY)
If the moulded 3 pin plug attached to this unit is damaged and
needs replacing, it is important that it is correctly destroyed and
replaced by an approved BS 1363/13A fused plug and that the
following wiring instructions are followed.
The wires in this mains lead are coloured in accordance with the
following code:
blue neutral
brown live
As the colours of the wires in the mains lead of this unit may not
correspond to the coloured markings identifying the terminals in
your plug, proceed as follows:
- The wire which is coloured blue must be connected to the
terminal which is marked with the letter N or coloured black.
- The wire which is coloured brown must be connected to the
terminal which is marked with the letter L or coloured red.
and
Ramiro de la Fuente
General Director
ENGLISH
22
22