Table of Contents
Advertisement
GasAlertMax
User Manual
Pump Test Option
The pump test option allows you to enable or disable the
pump test at startup. Enabling this option allows the detector
to try and detect a blocked inlet during startup.
To enter this option, press C when
the display reads toggLE PumP tSt.
The display then advises whether this option is now on or off.
22
STEL Period Option
By default, the short-term exposure limit (STEL) is based on
a 15-minute period. This option allows you to change the
period between 5-15 minutes.
To enter this option, press C when the
display reads StEL PEriod.
To change the STEL period, press H and G. Then press C
to save the new value.
If you do not press any pushbuttons within 8
seconds of entering this option, the detector
automatically saves the displayed value.
If you change the STEL period but pause for 8
seconds before pressing
the new value. The display shows Err, the detector
retains the original value, and the detector returns
to the user options menu.
Note
C
, the detector rejects
Advertisement
Table of Contents
