Table of Contents
Advertisement
The following table and figure illustrate how to replace a
sensor, pump, or pump filter. If the detector is on, shut down
the detector. Use a Phillips head screwdriver to loosen and
tighten any screws.
Do not use excessive force when removing or inserting the
sensor, or the sensor can be damaged. Gently rocking the
sensor back and forth can help free a tightly held sensor.
Insert the new sensor in the corresponding labeled
compartment.
Table 14. Replacing a Sensor, Pump, or Pump Filter
Item
A
Detector back screws
B
Sensor and pump cover
C
Pump filter window
D
Pump filter and o-ring
E
Pump
F
Sensors
Description
Figure 5. Replacing a Sensor, Pump, or Pump Filter
GasAlertMax
Maintenance
51
Advertisement
Table of Contents
