Table of Contents
Advertisement
GasAlertMax
User Manual
Pass Code Protect Activated
After a successful auto zero, the detector asks for the pass
code if the detector is pass code protected. The pass code
needs to be entered before proceeding to auto span and
alarm setpoints.
3.
The display will advise that calibration is locked.
It then requests the pass code. (Refer to the
Entering the Pass Code
36
section.)
Note
If the correct code is entered, the detector
automatically proceeds to set span.
If the pass code is not entered within 8 seconds or
the wrong pass code is entered, the detector
displays Not CorrEct.
The detector then beeps four times and
automatically returns to normal operation.
Advertisement
Table of Contents
