Table of Contents
Advertisement
User Downloadable Datalogger
The detector tests the data card. The display advises if the
card is present and ready for use.
If the card is missing or malfunctioning, the detector beeps
and flashes quickly. The display advises CArd Error and the
detector continues the self-test before proceeding to normal
operation.
The detector does not require the data card to be
present or functioning in order to operate.
Removing the card will cause a CArd Out message and a
brief alarm. Inserting the card will cause a CArd In message
and a beep for confirmation.
You can add or change the data card on user downloadable
units at any time. The detector supports card insertion and
removal while the instrument is active.
5.
The display shows the time and date.
6.
The display then shows the TWA, STEL, low, and
high alarm setpoints.
GasAlertMax
Activating the Detector
Note
11
Advertisement
Table of Contents
