Intercom Calls - NEC UNIVERGE SV9100 Reference Manual

Feature Key Overview:
Recall
Press the key to send a hook flash to the line you are currently using. Depending on
the line, it may put the caller on hold with Telco or hang up.
Feature
Used to activate the terminals setup functions and to program one-touch keys.
Feature + 1 – Turns microphone on/off.
Hold
Press this key to put a call on hold on your extension only.
Transfer
This button allows the extension user to transfer a call to another extension.
Speaker
Controls built-in speaker, which can be used for hands free dialing. LED on key
lights up when the key is active.
Help
Explanations of programmable keys can be called up on the LCD screen by pressing
and holding the HELP key and then a programmable key.
Exit
The user can exit from the menu or help mode by pressing this key.
Outgoing Calls:
To place an outgoing call, either lift the handset or press the Speaker Key (speaker
key will light up). You will hear dial tone. Press 9 and then the outside number. If
you use the Speaker Key you will have a hands-free conversation over the
speakerphone until you lift up the handset. Lifting the handset will automatically
move the conversation from the hands-free mode to handset mode. If you are on a
handset conversation and would like to change to a hands-free conversation, press
the Speaker Key once and replace the handset in the cradle. To disconnect, replace
the handset in the cradle or press the Speaker Key.

Intercom Calls:

To place an intercom call either lift the handset or press the Speaker Key (speaker
key will light up) and dial the extension number. If your phone has been
programmed with intercom keys for the person you wish to call, instead of manually
dialing the extension number you can just press the programmed key. If the called
person lifts the handset, the speaker turns off and the intercom conversation can
continue through the handset.