Panasonic AJ-HD2000 Operating Instructions Manual page 96

MULTI CUE SET UP menu
Key Key designation
F1 AUTO STEP
For setting the auto step
mode.
F2 PAG MODE
For setting the cursor
movement mode.
F3 PAG CLR
For clearing cue data on a
page.
F4 — —
F5 ALL CLR
For clearing all the cue
data.
F6–F7 — —
F8 EXIT
F9 CLUTCH
For setting the dial clutch
in the VAR mode.
F10 MAX SP.
For setting the maximum
tape speed in the VAR
mode.
F11 AUTO FRZ°
For setting the freeze
frame output in the VAR
mode.
F12 — —
F13 CUE ROLL
For setting the preroll time.
°This item is operational on the MULTI CUE menu screen.
ON: Moves the cursor to the next item automatically when a
cue point is registered.
OFF: Cursor is not moved.
≥When F2 (PAG MODE) below is at ON, the cursor moves only
on the page.
≥For example, upon completion of registration of cue point
number 10, the cursor moves to the time code input site of cue
number 1 on the same page.
≥When F2 (PAG MODE) below is at OFF, the cursor moves
between two pages.
≥For example, upon completion of registration of cue point
number 10, the cursor moves to the time code input site of cue
number 1 on the next page.
ON: Cursor moves only on the same page.
OFF: Cursor moves between two pages.
All the cue data on a page is cleared.
This function is executed when the key is pressed together with
the F key.
≥Data on a protected page is not cleared.
All the cue data is cleared.
This function is executed when the key is pressed together with
the F key.
≥Data on a protected page is not cleared.
Returns the VTR to the MULTI CUE menu screen.
ON: Sets the clutch to the j1a, 0a, i1a or i2a speed.
OFF: The clutch is not set.
s1<>r2: Tape speed in the range of j1 to i2
s1<>r1: Tape speed in the range of j1 to i1
0<>r1: Tape speed in the range of 0 to i1
ON: A freeze frame is output when the EXECUTE button is
pressed during variable mode. (Tape running continues.)
The setting is released when the STOP, PLAY, FF, REW,
JOG, VAR or SHTL button is pressed.
OFF: A freeze frame is not output.
Sets the preroll time.
Preroll time can be set in 1-second steps from 0 to 30 sec.
– 96 –
Description