AUDIO IN SET UP menu
Key
Key designation
F1
INT SG MD
F2–F5
— —
F6
PEAK HOLD
For setting the peak hold.
F7
SCALE
For switching the level
meter scale.
F8
EXIT
F9
DATA ADV°
1
F10
STYLE°
1
For setting the digital
audio input/output data
format.
F11
RATE CON°
F12–F13
— —
1
The data mode is operational only in the 4-channel audio versions of the 1080/59.94i and 720/59.94p system
°
formats.
1
The data advance amount and data style can be set on both the AUDIO IN SETUP menu and AUDIO OUT SETUP
°
menu. If the setting is updated on one menu, it will be updated on the other menu as well. Furthermore, these
settings cannot be performed on a channel by channel basis.
2
"Dolby" and the double-D symbol Î are trademarks of Dolby Laboratories Licensing Corporation.
°
3
RATE CON ON/OFF function
°
1
This menu item can be set on the AUDIO OUT SET UP menu as well. When its setting is changed on one of the
°
menus, the change will be reflected on both menus.
∑ Switching the audio level meter scale
For selecting the internal audio test signal.
TONE:
SILENCE: A signal tone is not output. (Mute signals are output.)
For holding the peak recording and playback levels on the
display.
ON:
Peak level is held.
OFF: Peak level is not held.
For switching the scale of the audio level meter on display to
standard scale or fine scale.
FINE: Scale in 0.2 dB incremens. (j24dB to j15dB)
FULL: Standard scale (j¶ to j0dB)
Refer to "Switching the audio level meter scale" (on this page).
Returns the VTR to the AUDIO IN menu screen.
0–1 Fr (in increments of 1/10th of a frame):
The amount by which the data is to be advanced when the
digital audio input/output format is in the data mode can be set
in increments of 1/10th of a frame. (When "0" is set, the
amount is set to the default setting inside the VTR.)
This menu item can be set by pressing the F10 key together with
the F key.
PCM: The format is set to the regular PCM audio mode.
DATA: The format is set to the data mode (compressed audio:
3
This enables recording and playback to be conducted either
through the rate converter in the AUDIO I/O area and with the
digital filter activated (function ON) or with the rate converter
bypassed and the digital filter remaining inactive (function OFF).
ON: For recording and playback through the rate converter.
OFF: For recording and playback with the rate converter bypassed.
≥If the audio level is adjusted below j24 dB in the FINE mode,
the ; mark is displayed; if it is adjusted above j15 dB, the :
mark is displayed.
Description
Reference level sinusoidal waves are output.
Dolby-E°
2
).
– 56 –