Panasonic AJ-HD2000 Operating Instructions Manual page 143

SYSTEM SET UP menu
Key Key designation
F7 SD SDI
F8 EXIT
F9 A.REC.GRD
F10 — —
F11 PB AUTO
F12–F13 — —
For selecting the format in which the signals are to be output to
SD SDI MAIN.
When the F7 key is pressed, the HD SDI MAIN output selection
window is opened. The output format can now be selected using
the cursor keys [but only when "720/59.94P" or "1080/23.98PsF"
(same format set for monitor as for HS SDI MAIN) has been
selected as the system format.]
525I: The output is in the 525i format.
525P: The output is in the 525p format.
The selection is entered by pressing the ENT key. At the same
time, the window is closed.
Returns the VTR to the SET UP menu screen.
Selects the recording/editing inhibit operation during
recording/editing by setting the cassette's C bit.
CST.C.BIT: If the C bit setting and SYSTEM menu setting are
at variance, the VTR is not transferred to the
recording/editing operation, and an operation error
will appear at the same time.
FREE: The VTR is transferred to the recording/editing
operation as per the SYSTEM menu setting. If the
C bit setting and SYSTEM menu setting are at
variance and an attempt is made to execute a
recording/editing operation, an operation message
will appear.
Selects whether to select the 4CH or 8CH mode using the
cassette's C bit setting during tape playback.
ON: The 4CH or 8CH mode is automatically selected during
playback using the cassette's C bit setting. (When the C
bit is UP, 4CH mode operation is performed; when it is
DOWN, 8CH mode operation is performed.)
If the tape recording format and the cassette C bit setting
are at variance, a warning message will appear.
OFF: The tape is played back in the mode set using the
SYSTEM menu regardless of the C bit status. If the tape
recording format and SYSTEM menu setting are at
variance, a warning message will appear.
– 143 –
Description