Panasonic AJ-HD2000 Operating Instructions Manual page 79

TC/CHR menu
∑ Superimposed displays
When TC.TC is selected as the SUPER setting, the time code appears as a 2-level display. (The HD
SUPER and SD SUPER are linked.) The converted time code is displayed on the top level of the superim-
posed display. On the bottom level, the display can be switched between the original time code recorded
on the tape and the converted time code.
Depending on the settings of the F11 and F12 keys on the TC/CHR CONVERT menu, the display patterns
are as shown below.
System frequency
TAPE
MENU SUPER (F11, F12)
1-level display
2-level display Top level
Bottom level
System frequency
TAPE
MENU SUPER (F11, F12)
1-level display
2-level display Top level
Bottom level
∑ Superimposed displays of format information
When the F12 (EX SUPER) key is pressed and set to ERR/FMT, the display of the following information can
be superimposed. The information relating to the format appears on the top-most level of the superimposed
display.
SYS: The frequency information of the SYSTEM format is displayed. For example, "23" is displayed when
the 1080/23psf format has been set.
TAPE: The frequency information of the format played back on the tape is displayed. For example, "24" is
displayed during playback when the tape has been recorded using the 1080/24psf format.
If the tape format is unspecified, "††" appears.
(When an error has occurred, the error display takes precedence over the format so that the format
is not displayed.)
S S=59 TAPE=59 Y
V R –0 07 A .
T L CR 0 : 4 0 3 . 3 1 0 1
24 (23.98)
24 25 30
24LTCR C 25LTCR 30LTCR
30LTCR 30LTCR 30LTCR
24LTCR C 25LTCR 30LTCR
24 (23.98) 25p/50i
24 25 24
24LTCR C 25LTCR 24LTCR
25LTCR 25LTCR 25LTCR C
24LTCR C 25LTCR 24LTCR
F11 (SUPER): TC.ST setting
F12 (EX_SUPER): ERR/FMT
setting
SYSTEM: 1080_59i
TAPE: 1080_59i
Example of superimposed
display when tape travels at
VAR (j0.07) speed
– 79 –
24 (23.98)
25p/50i
24 25 30
24LTCR 25LTCR C 30LTCR
30LTCR 30LTCR 30LTCR
24LTCR 25LTCR C 30LTCR
25
59 (60)
25 24 25
25LTCR C 24LTCR 25LTCR
25LTCR C 25LTCR 25LTCR
25LTCR C 24LTCR 25LTCR
S S=23 TAPE=24 Y
0 3 T L C R 0 : 0 1 4 : 3 7
4 2 T L C R 0 : 0 1 4 : 3 7
59 (60)
24 25
24LTCR 25LTCR C 30LTCR C
30LTCR C 30LTCR C 30LTCR C
24LTCR 25LTCR 30LTCR C
"C " is the cassette mark.
F11 (SUPER): TC.TC setting
F12(EX_SUPER): ERR/FMT
setting
SYSTEM: 1080_23PsF
2 8
TAPE: 1080_24p
TC/CHR_CONVERT
2 2
F9 (SUPR_FRQ): ON
F11 or F12 (SUPER): 24TC setting
30