Time Alarm; Deactivate Time Alarm; Snooze; Low Battery Icon - La Crosse S88907 Instruction Manual

Hold the ALARM button for 5 seconds to enter the alarm time
set mode.
1. The alarm hour digit will flash in the time display.
2. Press and release the ▼ or ▲ buttons to select the hour.
3. Press and release the ALARM button to set the minutes.
The minute digits will flash.
4. Press and release the ▼ or ▲ buttons to select the minutes.
5. Confirm with the ALARM button and exit.
6. The bell icon will show indicating the alarm is active.
7. The bell icon will flash when the alarm is sounding.
1. Press and release the ALARM button once to show
alarm time.
2. Press and release the ALARM button to deactivate
the Alarm.
3. The bell icon will disappear indicating the alarm is
no longer active.
1. When the alarm sounds, press the SNOOZE/LIGHT button
to trigger snooze alarm for 10 minutes. The snooze icon Zz
will flash by the weekday when the snooze feature is active.
2. To stop alarm for one day, press ALARM button, while in
snooze mode. The bell icon will remain solid.
Note: When the alarm sounds, it continues for 2 minutes
and then shuts off completely.
When displayed in Outdoor Temperature section,
•
replace batteries in the outdoor sensor.
When displayed in Indoor Temperature section,
•
replace batteries in the forecast station.
S88907

TIME ALARM

DEACTIVATE TIME ALARM

SNOOZE

LOW BATTERY ICON

www.lacrossetechnology.com/support
Low
Battery
Icon
pg. 12