The temperature (2°F/1°C) and humidity (3% RH) trend indicators update
every 30 minutes or less.
Temperature has risen in the past 3 hours.
•
Humidity has risen in the past 3 hours.
•
Temperature has not changed in the past 3 hours.
•
Humidity has not changed in the past 3 hours.
•
Temperature has fallen in the past 3 hours.
•
Humidity has fallen in the past 3 hours.
•
MANUAL WWVB RADIO-CONTROLLED TIME SEARCH
Press and release the TIME SET button to start or stop a WWVB signal
•
search.
Reception Icon will flash
•
For information about WWVB visit:
www.nist.gov/pml/div688/grp40/wwvb.cfm
Hold the ALARM button for 5 seconds to enter the alarm time set mode.
1.
The alarm hour digit will flash in the time display.
2. Press and release the ▼ or ▲ buttons to select the hour.
3. Press and release the ALARM button to set the minutes. The minute
digits will flash.
4. Press and release the ▼ or ▲ buttons to select the minutes.
5. Confirm with the ALARM button and exit.
6. The bell icon will show indicating the alarm is active.
7.
The bell icon will flash when the alarm is sounding.
1.
Press and release the ALARM button once to show alarm
time.
2. Press and release the ALARM button to deactivate the Alarm.
3. The bell icon will disappear indicating the alarm is no longer
active.
Model: 308-1425C
TEMPERATURE TREND ICONS
TIME ALARM
DEACTIVATE TIME ALARM
www.lacrossetechnology.com/support
pg. 11