Temperature Alert Sounds; Search For Outdoor Sensor; Max/Min Temperatures - La Crosse S88907 Instruction Manual

When temperature alert sounds, the corresponding alert bell

will flash.
The alert beeps once every minute, until the temperature is

out of alert range.
Press any button to stop alert. The alert bell will still show.

Disarm Alert: In normal mode, hold and release the ALERT

button to select the alert to disarm. With HI or LO alert
selected, press the ▼ button disarm alert.
Hold the HEAT/DEW button to search for the outdoor
•
sensor.
The strength signal icon will animate until the sensor signal
•
is received or for 3 minutes if no signal available.
The forecast station provides the daily minimum and maximum
temperatures each day starting at midnight (12:00 AM). The
Forecast station automatically resets the min/max
temperatures at midnight (12:00 AM).
View MIN data: Press and release the ▼ button to view the
minimum Indoor and Outdoor Temperatures.
Reset MIN data: Hold the ▼ button for five seconds and the
Indoor and Outdoor Minimum Temperatures will be reset.
View MAX data: Press and release the ▲button to view the
maximum Indoor and Outdoor Temperatures.
Reset MAX data: Hold the ▲ button for five seconds and the
Indoor and all Outdoor Maximum Temperatures will be reset.
Note: The temperature areas will show dashes briefly then
return to current temperatures.
S88907

TEMPERATURE ALERT SOUNDS

SEARCH FOR OUTDOOR SENSOR

MAX/MIN TEMPERATURES

www.lacrossetechnology.com/support
pg. 10