Initial Setup - La Crosse S88907 Instruction Manual

Step 1: Insert 2 new AA batteries (not included)
into the TX141TH-Bv2 sensor. Observe
the correct polarity.
Step 2: Insert the 5.0 volt AC adapter (included)
into the forecast station.
Step 3: (Optional) Insert 3 AAA batteries (not included) into
the forecast station.
Step 4: After 5 minutes, place the sensor outside in a shaded
location. Maximum transmission range is 300 ft.
(91 meters).
Note: If the outdoor temperature area shows dashes after 3
minutes, hold the HEAT/DEW button on the weather
station to search for the sensor. Press the TX button on
the sensor to send a signal.
S88907

INITIAL SETUP

AC Adapter
www.lacrossetechnology.com/support
TX
Button
pg. 3