Set Time Alarm; Activate/Deactivate Time Alarm - La Crosse 308-146 User Manual

Set Time Alarm

In normal mode, hold the TIME ALARM button for three seconds to enter alarm set mode.
 ALARM HOUR: Press and hold the ALARM button to enter alarm time setting mode. The Alarm Hour
will flash. Use the +/RCC or -/°F/°C button to set the Hour. Press and release the ALARM button.
 ALARM MINUTE: The Alarm Minutes will flash. Use the +/RCC or -/°F/°C button to set the Minutes.
Press and release the ALARM button to exit.
Note: When no buttons are pressed for ten seconds, the forecast station will save the last change and
default back to normal mode

Activate/Deactivate time alarm

ACTIVATE:
 From the time mode, press and release the ALARM button once to show Alarm Time.
 With the Alarm time showing, press and release the ALARM button to activate the alarm.
 The alarm icon (bell) appears when alarm is activated.
DEACTIVATE:
 From the time mode, press and release the ALARM button once to show Alarm Time.
 With the Alarm time showing, press and release the ALARM button to deactivate the alarm.
 The alarm icon will disappear when alarm deactivates.
Snooze Alarm
 When the alarm sounds, press the SNOOZE button to trigger snooze alarm for 9 minutes.
 The snooze icon Zz will flash when the snooze feature is active.
 To stop alarm for one day, press AL button, while in snooze mode.
 The alarm icon (bell) will remain solid.
Time is off by hours
 Check to see if the WWVB Tower icon appears on the Weather Station. If not, the Weather Station
has not received a WWVB time signal in the past 24-hours.
 Reposition the Weather Station with the front or back facing Colorado.
 Check that the Time Zone selected correctly reflects your location. Adjust the time zone in the
Program Menu.
 Check that the DST indicator is correct for your location (most areas observe DST so this should be
ON). Adjust the DST indicator in the Program Menu.
No WWVB tower icon
 The Weather Station has not received a WWVB time signal in the past 24-hours.
 Position the Weather Station for better reception.
 Be sure you have good batteries in the Weather Station or that the a/c cord is properly attached.
 Hold the +/RCC button to send the Weather Station on a signal search at night.
 Allow up to 5 nights to receive the time signal.
Manually Set Time/Date: Program Menu
PROGRAM MENU: The SET button will move through the program menu.
The +/RCC or -/°C/°F button will change the value.
 WWVB ON/OFF: Hold the SET button 5 seconds and WWVB and the word ON will flash. Press and
release the +/RCC or -/°C/°F button to turn this to OFF if you do not wish WWVB reception. Confirm
with the SET button and move to the next item
 TIME ZONE: EST will flash. Press and release the +/RCC or -/°C/°F button to select a different Time
Zone:
AST=Atlantic
EST= Eastern
La Crosse Technology, Ltd. www.lacrossetechnology.com/support Page 9