Temperature Alerts; Arm/Disarm Temperature Alerts - La Crosse S88907 Instruction Manual

The forecast station offers individual, programmable high and
low temperature alerts.
Hold the ALERT button for five seconds, until the forecast
station beeps, to select and set temperature alert values. Each
alert value will flash separately during alert set mode.
OUTDOOR HIGH alert will flash. Press the ▼ or ▲ buttons to

set the alert value, and press the ALERT button to confirm.
Then press the ALERT button again switch to OUTDOOR LOW
setting.
OUTDOOR LOW alert will flash. Press the ▼ or ▲ buttons to

set the alert value, and press the ALERT button to confirm.
Then press the ALERT button again switch to INDOOR HIGH
setting.
INDOOR HIGH alert will flash. Press the ▼ or ▲ buttons to

set the alert value, and press the ALERT button to confirm.
Then press the ALERT button again switch to INDOOR LOW
setting.
INDOOR LOW alert will flash. Press the ▼ or ▲ buttons to

choose the value, and press the ALERT button to confirm and
exit.
Note: After selecting temperature alert values use the next
step to turn individual alerts ON or OFF.
In normal time mode, press and release the ALERT

button to toggle between:
Outdoor HI
o
Outdoor Lo
o
Indoor HI
o
Indoor LO
o
Press the ▲ button to arm the selected alert.

The alert bell appears when each alarm is activated.

Press the ▼ button to disarm the selected alert.

OFF will show in the Alerts area if no alert is active.

S88907

TEMPERATURE ALERTS

ARM/DISARM TEMPERATURE ALERTS

www.lacrossetechnology.com/support
pg. 9