La Crosse S84107 Quick Setup Manual

QUICK SETUP GUIDE
Atomic Forecast Station
with Moon Phase
Model: S84107
DC: 080817
www.lacrossetechnology.com/support/S84107
STE P 1: P OW ER UP
Install batteries into your sensors & station in any order. Plug the
included power cord into an outlet and then into the station. The power
cord is required at all times.
Note: For detailed instructions on how to power up your station & sensor,
please review the full manual.
STE P 2: MO U N TI N G BASICS
T HE RMO -HYG R O
Keep out of direct sunlight & ensure the sensor is well-ventilated. We
recommend mounting under a deck or eave facing north.
Watch sensor mounting video: http://bit.ly/TH_SensorMounting
ST E P 3: BAS IC S ET TINGS
Hold the SET button to enter set mode. Use +/- buttons to adjust and
SET to confirm.
Setting Order: 1. Language, 2. Beep ON/OFF, 3. Atomic ON/OFF,
4. DST ON/OFF, 5. Time Zone, 6. 12/24, 7. Hour, 8. Minutes, 9. Year,
10.Month, 11. Date, 12. °F/°C, 13. Pressure INHG/HPA, 14. Pressure number
DI SP LAY ICON S
Sensor Reception Humidity Atomic Time
Fahrenheit | Celsius Alert Icon DST Indicator
Trend Arrows Low Battery Seasonal Trees
Temperature AM | PM Forecast Icons
Humidity Percent RH Moon Phase Pressure Graph
-24h -18h -12h -9h- 6h -3h0 h