Traffic Statistics - Tenda W303R User Manual

11n wireless
Hide thumbs Also See for W303R:
Table of Contents

Advertisement

The setting method is the same as Example 1.

4.7 Traffic Statistics

Traffic statistics is used to display the bandwidth that LAN PC used.
Enable Traffic statistics: It is used to calculate the traffic used by the LAN computers. You
can enable it to calculate the traffic for you. Usually, disable it to improve the router's data
packet processing ability, and the default is disabled. When this function is enabled, the
webpage will refresh automatically every five minutes, meanwhile, each computer's traffic
value will refresh automatically.
IP address: the IP address of the computer whose traffic is being calculated.
Uplink rate: the data sending speed per second, the unit is KByte/s.
Downlink rate: the data receiving speed per second, the unit is KByte/s.
Sent message: the number of the calculated computer's data packets that are sent
out through the router.
Sent Bytes: the volume of the calculated computer's statistics that is sent out
through the router
24
11N Wireless User Guide

Advertisement

Table of Contents
loading

Table of Contents