Mounting The Device To A Panel - Siemens RUGGEDCOM RS900GP Installation Manual

RUGGEDCOM RS900GP
Installation Guide
1
Figure 3: DIN Rail Mounting
1. DIN Rail 2. DIN Rail Bracket
3. Pull the release on the bracket down and slide the device onto the DIN rail. Let go of the release to lock the
device in position.
Section 2.1.2

Mounting the Device to a Panel

For panel installations, the RUGGEDCOM RS900GP can be equipped with panel adapters that allow the device
to be attached to a panel in multiple orientations.
Mounting the Device to a Panel
Chapter 2
Installing the Device
1
2
7