Communication Ports; Port Leds - Siemens RUGGEDCOM RS900GP Installation Manual

RUGGEDCOM RS900GP
Installation Guide

Communication Ports

The RUGGEDCOM RS900GP features eight standard 10/100Base-TX copper RJ-45 Ethernet ports capable of
Power-over-Ethernet (PoE). It can also be equipped with two additional Gigabit Ethernet capable ports, for which
many fiber transceiver and copper options are available.
Each communication port type has a specific place in the RUGGEDCOM RS900GP chassis.
Figure 10: Port Assignment
1. Copper Ethernet, SFP or Fiber Optic Ethernet Ports (Ports 9 and 10)
The following sections describe the available ports:
• Section 3.1, "Port LEDs"
• Section 3.2, "Copper Ethernet Ports"
• Section 3.3, "Fiber Optic Ethernet Ports"
• Section 3.4, "SFP Optic Ethernet Ports"
Section 3.1

Port LEDs

Each communication port features a dedicated LED to indicate the port's link/activity status and power state. The
LED is either built into the port (ports 1 to 8) or adjacent to the port (ports 9 and 10).
Port LEDs
1
2
2. Standard PoE Ports (Ports 1 to 8)
Chapter 3
Communication Ports
15