Connecting Power - Siemens RUGGEDCOM RS900GP Installation Manual

Chapter 2
Installing the Device
Figure 4: Panel Mount Options
1. Rear Mount Orientation
1. Secure the adapters to the device in the desired orientation.
2. Place the device against (side or rear mount orientation) or insert it into (front mount orientation) the panel
and align the adapters with the mounting holes.
Figure 5: Panel Mounting (Rear Mount Orientation Shown)
1. Screw 2. Panel Adapter
3. Install #6 screws (not supplied) to secure the adapters to the panel.
Section 2.2

Connecting Power

The RUGGEDCOM RS900GP features a single, integrated low DC power supply, which accepts dual power
supply inputs for redundancy.
8
1
2. Front Mount Orientation 3. Side Mount Orientation
1 2
2
2
1
RUGGEDCOM RS900GP
Installation Guide
3
Connecting Power