Acknowledging An Alert; Deleting An Alert - HP HPE VAN SDN Controller 2.7 Administrator's Manual

Figure 7 Example of the Alerts as of today window
To close the window, do one of the following:
To close the window and display the Alerts screen, click All.
At the bottom of the window, click the collapse icon (
In the top banner, click either the alert counter number or

Acknowledging an alert

To acknowledge an alert from the Alerts as of today window:
1. Click the alert to select it.
2. Click Acknowledge.
The controller removes the alert from the Alerts as of today window, displays the alert in
gray text on the Alerts screen, and decrements the alert notification counter by one.
To acknowledge an alert from the Alerts screen:
1. Click the alert to select it.
2. Click Acknowledge.
The controller displays the alert in gray text on the Alerts screen, and decrements the alert
notification counter by one.

Deleting an alert

You can acknowledge an individual alert, but you cannot clear or delete the alert.
The controller deletes alerts according to the configured alert age-out policy. To configure the
age-out policy, see
30 Using the SDN controller UI
"Configuring how alerts age out" (page 31)
).
.