Licensing; Redeem Quantity Error; Install Id Format Errors; Install Id Errors - HP HPE VAN SDN Controller 2.7 Administrator's Manual

Cause
Making changes to the date and time or NTP server information using the GUI will change the
permission of the file /etc/net.conf.
After that, using the post install script to change date and time or NTP server information (python
config_sdn.py –d) will fail because the script will try to access the /etc/net.conf file
which has had the permission changed.
Action
Once you use the controller GUI to change date and time or NTP server, continue to make any
subsequent changes to date and time or NTP server using the GUI rather than the script.
Or you can reset the permissions on the /etc/ntp.conf file with the command: sudo chmod
644 ntp.conf.

Licensing

Redeem quantity error

Symptom
You see an error message that your license has a maximum redeem quantity.
Cause
You specified a license quantity that exceeds what your license type supports.
Action
1. Return to the My Network portal license selection screen.
2. Enter the correct quantity in the Redeem column for your license type:
For an HPE VAN SDN Ctrl Base SW w/ 50–node E-LTU license, the quantity must be
1.
For HPE VAN SDN Ctrl 50–node E-LTU or HPE VAN SDN Ctrl HA E-LTU licenses, the
quantity can be any quantity on your sales order.

Install ID format errors

Symptom
You see an error message that your Install ID format is invalid.
Cause
You entered an invalid Install ID, or have not entered an Install ID.
Action
1. Carefully check your Install ID.
2. Return to the license registration details screen and enter a valid value in the Install ID field.

Install ID errors

Symptom
You see an error message that your Install ID is required.
Cause
The Install ID has not been entered in the portal during the registration process.
Licensing 157