Obtaining Applications From The Hewlett Packard Enterprise Sdn App Store; Adding Or Upgrading An Application - HP HPE VAN SDN Controller 2.7 Administrator's Manual

Screen component
State
AppStore Purchased
Applications
Launch AppStore

Obtaining applications from the Hewlett Packard Enterprise SDN App Store

From the App Store, you can purchase and download applications for your controller.
In the case of a web proxy, you need a proxy configuration to connect to the App Store portal.
To set the proxy, in the /etc/init/sdnc.conf file, replace c1, c2, c3, and team with the
controller IP addresses and the team IP address (when applicable):
env JAVA_OPTS="-Xms512m -Xmx4096m -XX:MaxPermSize=512m -Dhttps.proxyHost=my-web-proxy
-Dhttps.proxyPort=my-web-proxy-port -Dhttp.nonProxyHosts=127.0.0.1|localhost|c1|c2|c3|team"
Command Example
env JAVA_OPTS="-Xms512m -Xmx4096m -XX:MaxPermSize=512m -Dhttps.proxyHost=web-proxy.test.com -Dhttps.proxyPort=8088
-Dhttp.nonProxyHosts=127.0.0.1|localhost|11.152.121.172|11.152.126.13|11.152.127.5|11.152.123.6"
You must update the /etc/init/sdnc.conf file on each controller and then restart the
controllers for these changes to take effect.
If you are downloading a signed application from the App Store, the JAR signing requires a
trusted certificate in the sdnjar_trust.jks file even if the certificate is trusted in the JAVA
cacerts keystore. For details, see

Adding or upgrading an application

Any application in the proper format can be added to the controller (see
manager" (page
To use curl commands and the REST APIs to complete this task, see
After you complete this procedure:
The application is started and in an active state.
If the controller is in a controller team, the controller propagates the application to all the
controllers in the team automatically.
Use this procedure to install either a new application or a new version of an existing application
on the controller using the UI.
1. Do one of the following:
To install a new application, click New.
To upgrade to a new version of an existing application, select the application from the
Name list and click Upgrade.
2. Click Browse to navigate to the location of the application zip file and select the file.
3. Click Upload to upload the file.
Wait for Completed to appear. For example:
34 Using the SDN controller UI
Description
The most common states are active, staged and disabled.
The name and version number of SDN applications purchase from the Hewlett
Packard Enterprise SDN App Store.
Launches the Hewlett Packard Enterprise SDN App Store website.
"Adding certificates to the jar-signing truststore " (page 121)
32)).
"About the application
"curl commands" (page 170).